Flame Penetration/Flame Measurement Infrared Camera System

• Customization: Available
• Type: Monitoring System
• Application: High Temperature Environment
• Model NO.: BY-SG9
• Feature: Heat-Resistant
• Video Capture System: Thermal Camera
• Video Transmission System: Optical Fiber Transmission
• Software Function: Monitoring
• Software Usage: Computer Monitoring Software
• Client Software: Client Software
• Model: CCTV
• Sensor: CCD
• Kind: Autofocus Lens
• Technology: Infrared
• Transport Package: Wooden Case
• Specification: 80*95*60cm
• Trademark: BAOYI
• Origin: China

Product Description

Product Description

 

Auto-protection function
This device will exit when any one of following condition appears: the pressure is low, the temperature is over high and the power is cut-off. The action collecting points of protective function are: pressure controller which is fixed at the output of fine filter, temperature probe which is fixed in the inner layer of camera housing, and electromagnetic valve in control box.

1. Low-voltage exit:
When pressure controller detecting the pressure of compressed air from precise filter is lower than 0.4Mpa, the inner switch cut off. This signal is feed back to PLC in control box through control line. PLC disposes the signal and controls the camera housing exiting
2. High temperature auto-exit:
The thermocouple temperature probe, fixed at the head of camera housing, sample the temperature reference value. Then send the data to temperature display in the control box through sensing line. It will be converted to digital signal and displays on panel. When the temperature of the head of camera housing is less than 55ºC, the switch relay in display will be cut off. This signal is feed back to PLC in control box through control line. PLC disposes the signal and control the camera housing exiting
3. System power-off exit:
The extension and exit of the equipment is controlled by a solenoid valve placed at the end of the gas tank in the electrical control cabinet. When the solenoid valve is energized, the device will extend the probe into the furnace wall to observe the working conditions in the furnace; when the solenoid valve is powered off, the device will withdraw the probe. When the system is powered off, the entire control circuit loses power, the solenoid valve is in a power-off state, and the probe exits the observation hole on the furnace wall.

Software Features

 

1. Real-time monitor and record
2. Complete parameter setting and remote control
3. Detailed record of rapidly changing thermal processes
4. Temperature measurement and alarm analog output
5. RS232 communication or DLL communication

Detailed Photos

 

 

Product Parameters

 

Resolution	764 × 480
Measuring temperature range	450°C ~ 1800°C
Spectral response	0.92~1.1µm
Lens	FOV 87°× 62°(f=6mm) 51°×33 °(f=12mm) 39°×25 °(f=16mm) 26°× 16°(f=25mm) 13°×8 °(f=50mm) 9°×5 °(f=75mm)
Thermal sensitivity	< 1K (700°C), < 2K (1000°C)
Detector	CMOS (15µm x 15µm)
Digital output	USB 2.0
Standard Process Interface (PIF)	0-10V input and output, digital input up to 24V
Industrial Process Interface (PIF)	2×0-10V input, digital input up to 24V, 3×0-10V output, 3× relays (0 - 30V/ 400mA), fault protection
Cable length (USB)	1m (standard), 5m, 10m
Power supply	USB
Tripod mount port	¼-20 UNC
Protection class	IP67
Ambient temperature	0°C~50°C
Storage temperature	-40°C~70°C
Relative humidity	20~80%, no condensation
Vibration	IEC 60068-2-6/ IEC 60068-2-64
Dimensions	46mm x 56mm x 90mm

Company Profile

Here is Changzhou Baoyi Mechanical and Electronic Instrument Company,  we make your industrial furances safer.
More than 20 years ago, Baoyi was established in Changzhou by Mr.Liu. Time has witnessed Baoyi's every step in exploring high temperature monitoring and detecting technology.
What's more, Baoyi constantly exchanges and cooperates with domestic and foreign counterparts and scientific research institutions. As a result, we successfully develops a full range of temperature measurement products. Here are some exclusive repesentatives: industrial CCTV system with temperature measurement, imaging pyrometer, SLR high temperature endoscope, infrared thermal imager, etc.
Since we have strong innovational strength, excellent quality and international service, Baoyi has fulfilled thousands of high temperature monitoring projects. Various products have been widely used in cement, glass, metallurgy, petrochemical, electric power and other industries. Our business is conducted not only all over the country but also more than 50 overseas countries and regions.
"Make furnaces safer" is not just a slogan, it has become our guideline. From the past to the future, Changzhou Baoyi will strive to build a high-tech and service-oriented  international furnace monitoring enterprise.
 

FAQ

Q1:Are you a manufacturer?
A1:Yes, we have our own factory in Changzhou. 

Q2: How about the loading port?
A2: Shanghai, China/ Guangdong, China

Q3: How long is the warranty period?
A3: The warranty is usually 12 months after you receive the products. For longer, we can communicate.

Q4: What's the delivery time?
A4:Usually 25 working days after receiving payment. If some equipments are customised, it may need 30 to 45 working days.

Q5:How to deliver?
A5:According to customers' needs, sea shipping and air shipping are both available. 

Q6:How about the package?
A6:According to different products, we use carton box and wooden case.

Q7:How about terms of payment? 
A7: Usually 100% T/T before shipping. If you have special requests, we can negotiate.

Other questions, please feel free to contact us. We are willing to help.